Chart Recorder

• Make Sunsui
• Highly precise Sealed Potentiometer as a feedback element
• Highly Precise & Accurate Synchronous or Stepper motors
• Predefined Input signal K, J, R, S, T Thermocouples, DC mA, DC mV, RTD (Length compensated)
• Accuracy Level 0.5 % FSD
• Chart Speed 1 day or 7 day/revolution selectable (Stepper motor)
• fixed speed predefined 4Hrs,8 Hrs,12 Hrs, 24
• Hrs, 7 days one of it (Synchronous motor)
• Range selectable through span-zero adjustment by source
• Power Supply 110 VAC/240 AC 50 Hz (Predefined) Chart circular disk type
• Predefined built in indicator or controller single set point
• Straight line recorder having pointer, writing pen on one carriage for better response and accuracy
• Circular chart writing widths 52.5 mm, 100 mm (100 mm dia. & 257mm dia.)
• Easily replaceable & disposable fiber tip Pen
• Time Vs Process value continuous line Graph

• Housing: MS Enclosure with powder coated Black colored
• Front Door: Transparent Acrylic sheet.
• Back Connector: Screw Terminal Block
• Dimensions: see drawing beside
• Consumption: 25 to 50 VA as per model
• Working Conditions: Temp. – 10 °C to 50 °C & 0 – 80 %Rh
• Weight: 5 Kg to 10Kg Net.
• No of Pen: According to models. Excitation Voltage for Transmitter 24 VDC optional
• Response time: 1 sec

Applications:

• Process Parameters – Temperature, Humidity, Pressure, Ph, Conductivity, Gas Conductivity, Gas Analysis, AC Voltage, AC Current ,kw, KVA,Power Factor, Frequency, Radiation, and Wind Direction, Wind Speed etc.

• Make Sunsui
• Highly precise Sealed Potentiometer as a feedback element
• Highly Precise & Accurate Synchronous or Stepper motors
• Predefined Input signal K, J, R, S, T Thermocouples, DC MA, DC mV, RTD (Length compensated).
• Accuracy Level 0.5 % FSD
• Chart Speed 15/30/60/120/240/480 & 960mm/Hr selectable (Stepper motor)
• Fixed speed predefined 20/60/120…./1200mm/Hr one of it (Synchronous motor)
• Range selectable through span-zero adjustment by source
• Power Supply 110 VAC / 240 AC 50 Hz (Predefined) Chart fan fold type
• Predefined built in indicator or controller single set point
• Straight line recorder having pointer, writing pen on 1 carriage for better response and accuracy
• Strip chart writing widths 100mm, 120mm, 180mm & 250mm
• Easily replaceable & disposable fiber tip Pen
• Time Vs Process value continuous/dotted line Graph

• Housing: MS Enclosure with powder coated Black colored
• Front Door: Transparent Acrylic sheet
• Back Connector: Screw Terminal Block
• Dimensions: see drawing beside
• Consumption: 25 to 50 VA as per model
• Working Conditions: Temp. – 10 °C to 50 °C & 0 – 80 %Rh
• Weight: 5 Kg to 10Kg
• Net. No of Pen: According to models. Excitation Voltage for Transmitter 24 VDC optional
• Response time: 1 sec.

• Process Parameters – Temperature, Humidity, Pressure, Ph, Conductivity, Gas Conductivity, Gas Analysis, AC Voltage,AC Current ,kw, KVA,Power Factor, Frequency, Radiation, And Wind Direction, Wind S peed etc.

• Microprocessor based highly precise design in combination potentiometric feedback for better accuracy
• Field Configurable input signal with the help of splash proof membrane keypad

Technical Specifications:

• Input: Universal 3 wire PT 100/(J, K) Thermocouple/4 to 20 mADC/0 to 5 VDC

• Range and decimal point Scalable as per the requirement

• Indication: 4 Digit, 0.5” 7 Segment, red LED display with separate indication for alarm set points.

• Optional one control set point for heater /compressor with max 180 sec delay

• Alarm: Two alarms each having relay with NO and NC potential free relay contacts with rating of 230 V A C, 6 A resistive load

• Response time less than 1 sec

• Calibration through splash proof membrane keypad

• Transmitter supply 24 VDC for powering the transducer (Optional)

• Supply 230 VAC / 110 V AC, 50 Hz ± 10 % mains powered

• VA rating: 15 VA

• Pre processor Based Programmable Chart Recorders
• Input = Mv/Ma/Rtd (Selectable), Range = Programmable
• Chart Speed – Selectable (15/30/60/120/940 Mm/Hr) High/Low Alarm Selectable
• Front Key Operated With 3 ½ Digit Led Display Optional Rs 232/Rs 485 Serial Port

• Programmable Input signal RTD, DC mA, DC mV
• Accuracy 0.25 % FSD
• Chart Speed 1 Day/7 Day per revolution programmable
• Range programmables
• Power Supply 110/240v AC/50 Hz (3 ½ Digit 7 segment LED for Process Value Indication
• Very Compact in Size
• Easy Calibration With Front Keys
• Applications: Any Process Parameters – Temperature, Humidity, Pressure, Ph, Conductivity, Gas Conductivity, Gas Analysis, AC Voltage, AC Current, kw, KVA, Power Factor, Frequency, Radiation, and Wind Direction, Wind Speed etc. Can be Recorded

• Power supply 240vac/110 vac & for mA or mV dc signals. 24vdc/12vdc power supply can be incorporated. Different models in Single Pen, Two Pens and Multi Point (Six Point)

• Recorder are manufactured in 100 mm, 120 mm, 180 mm and 250 mm Chart Width having fix Speed of 20 mm, 60 mm and 120 mm or adjustable chart speeds by selector switch upto 960 mm/hr by stepper motor. Inputs of Temperature, RTD, and Thermocouple. Linear Input like 4 - 20 m Amp, 0 - 10 V Dc or as specified are manufactured Taylor made. Useful for Parameters like, Temperature, Humidity, Flow, Current, Voltage, pH, Conductivity, Wind Flow, Wind Direction, Radiation etc.

• Make Sunpro
• Highly precise Sealed Potentiometer as a feedback element
• Highly Precise & Accurate Synchronous or Stepper motors
• Predefined Input signal K, J, R, S, T Thermocouples, DC mA, DC mV, RTD (Length compensated)
• Accuracy Level 0.5 % FSD
• Chart Speed 15/30/60/120/240/480 & 960mm/Hr selectable (Stepper motor) or fixed speed predefined 20/60/120/1200mm/Hr one of it (Synchronous motor). Range selectable through span-zero adjustment by source
• Power Supply 110 VAC / 240 AC 50 Hz (Predefined) Chart fan fold type
• Predefined built in indicator or controller single set point
• Straight line recorder having pointer, writing pen on one carriage for better
• response and accuracy
• Strip chart writing widths 100 mm, 120 mm, 180 mm & 250 mm
• Easily replaceable & disposable fiber tip Pen
• Time Vs Process value continuous/dotted line Graph

• Housing: MS Enclosure with powder coated Black color
• Front Door: Transparent Acrylic sheet
• Back Connector: Screw Terminal Block
• Dimensions: see drawing beside
• Consumption: 25 to 50 VA as per model
• Working Conditions : Temp. – 10 °C to 50 °C & 0 – 80 %Rh Weight : 5 Kg to 10 Kg
• Net. No of Pen: According to models. Excitation Voltage for Transmitter 24 VDC optional
• Response time: 1 sec

Applications:

• Process Parameters – Temperature, Humidity, Pressure, Ph, Conductivity, Gas Conductivity, Gas Analysis, AC Voltage, AC Current, kw, KVA, Power Factor, Frequency, Radiation, and Wind Direction, Wind Speed etc.

• The 8” 256 colour (size 120, 160 mm) TFT monitors are used for attractive display. Which is available with us at most economical prices
• Microprocessor based highly precise design with 256 color TFT screen as display unit
• Display resolution of 640-48 and size of 120-160 mm which can be upgradeable to for 15” display
• Log Time/Print Time selectable from 1 min. to 99 min
• Memory: Non Volatile 500 to 1000 readings/channel depending on model MS windows based monitoring software available

We are one of the prominent manufacturers of a wide range of Micro Controller based Circular Chart Recorder. These are manufactured under the strict supervision of our expert quality controllers following international industrial standards. Precisely designed and developed our devices are acclaimed for their easy installation, compact designs and longer service life. These are available with us in various technical specifications and range.

Features:

• Make Sunsui
• Potentiometric as well as Microprocessor Based feedback
• Highly Precise & Accurate Servo/Stepper motors
• Defined Input signal RTD, DC mA, DC mV (Length compensated)
• Accuracy Level 0.25 % FSD
• Selectable Chart Speed 1 Day/7 Day per revolution
• Selectable Range as per field requirement
• Power Supply 110 VAC/240 AC 50 Hz (Predefined) 3 ½ Digit 7 segment LED for Process Value Indication
• Very Compact in Size
• Easy Calibration With Front Keys

Technical Specifications:

• Housing: MS Enclosure with powder coated Black colored
• Front Door: Transparent Acrylic sheet
• Back Connector: Screw Terminal Block
• Dimensions: see drawing beside
• Consumption: 30 VA Working
• Conditions: Temp. – 10 °C to 50 °C & 0 – 80 %Rh Weight : 4 Kg
• Net. No of Pen: One. Ex. Voltage for Transmitter 24 VDC optional. High Low alarm with selectable range. Resolution 0.1
• User Programming: 4 Keys & Display. Relay Output for Alarm/Control. Hysterisis band selectable
• Response time: 1 sec

Applications:

• Process Parameters – Temperature, Humidity, Pressure, Ph, Conductivity, Gas Conductivity, Gas Analysis, AC Voltage, AC Current, kw, KVA, Power Factor, Frequency, Radiation, and Wind Direction, Wind Speed etc. Can be recorded.